Cleaning your house with a vacuum cleaner may be a breeze but what’s a nightmare is cleaning the vacuum cleaner from time to time after it accumulates the evidence of dirt from your demanding lifestyle.
The Top Tips on How to Clean Your Dirty Vacuum
Here is a guide on how to go about it so this doesn’t seem to be a piece of work.
Step 1- Prepping yourself.
You need to know that you have all the things that you need to start the vacuum cleaning process. To get things started, we recommend you to keep a manual handy with you.
Step 2 – Take it outdoors
Try doing this drill outdoors as this job will surely be messy. If you live in an apartment and going outside isn’t a feasible idea, don’t worry. Just try to do it in a clean and open space so that you don’t have to worry about the dirt. You could, for instance, do it in your bathroom or in your garage room.
Step 3 – Take all the things you need
For instance, here is a list of the things that you would need.
– Soap and Water
How To Start Vacuum Cleaning?
While these were some of the essentials that you need, you would have to use them properly to clean the vacuum properly.
Also, along with these, there are some other important things as well. Here is a look at a few of them and how you can go about cleaning your vacuum with them.
The filter is your protection gear against the dust particles. But that too needs maintainence. If you have a washable filter, detach it from the vacuum and dip it on cold water for atleast half an hour. You can also replace your filter instead.
If you use a washable filter, make sure to let it dry for atleast a day before putting it back in.
You may have a bag in your vacuum for debris collection so in that case you just need to dismantle it and change it.
In case of canister, you need to first vacate all the garbage from there, dismantle the canister from the vacuum gear then use moderately warm soap and water solution, and dip in the canister while you use a brush to clean the debris and particles out. Repeat this process for both the inner and outer portions respectively using a brush or a piece of cloth.
You need a pair of scissors for this step. It is important to follow this step as trapped hair, particles and threads can entangle the bristles of the powerhead brush making it difficult for this part of the vacuum to work.
Cut away the hair and other particles using the scissors but leave the bristles out. Use an old toothbrush to disentangle the remaining hair and particles.
For attachments, you need a bucketful of moderately warm water with a few spoons of soap and you just dip the attachments inside and clean them up. If there’s any hair particles or any entanglements, you can use your toothbrush to get them out. For the rest, just rinse and let the attachments dry for a day at least. You could even use a dryer or keep them under the sun or in a dry environment – to make them dry out faster.
How Often Should You Do Vacuum Cleaning?
Cleaning a vacuum cleaner isn’t rocket science. All you need is to utilize the simple steps and keep every old reusable article handy at your place which can be used for the vacuum cleaning drill. Make sure your cleaning method is meticulous and you periodically clean your vacuum so as to enhance its longevity and efficiency. And as far as the filter is concerned, you need to clean it every 3 months so that your vacuum works well.
Make sure your cleaning method is meticulous and you periodically clean your vacuum so as to enhance its longevity and efficiency. And as far as the filter is concerned, you need to clean it every 3 months so that your vacuum works well.
Thank you for reading. Read more on Clean The Floor for more Vacuum Cleaning Tips & Tricks.
Recommended vacuum cleaner: Bissell 9595a vacuum with onepass is a popular one that you should have in your house.